Antique Hand Cranked Hammer Drill - Restoration

  • Zverejnené Pred 4 mesiacmi

    my mechanicsmy mechanics

    trvanie: 26:34

    It was in spring this year when I picked up this beaten up antique hand cranked hammer drill. My friend has found it on the steel waste together with the german „Weltrekord“ ratchet screwdriver. The condition of the drill was super bad. It was very corroded, had a lot of missing screws, the handle was in very bad condition and the crank was bent so much you couldn't even make a full turn. That's all said, it was the perfect item for a new restoration video.
    At first I thought this should be a quick and easy project, but one problem after the other became visible and it turned out to be a real challenge. There was the big dent in the left side of the case. Usually you can't bend casted parts, but with a bit of heat and careful pressure on the arbor press I was able to remove it a bit. It also worked to get rid of the warping with some heat. For the finish of the housing I wanted to have an antique cast aluminium look. I thought it would look very cool if I could tumbler these parts after sandblasting. I ended up building a huge rotary tumbler from scratch and it worked very well (video link below).
    Another big issue was the tool holder and the drill bit, as they were both completly rusted. Big thanks to @Hand Tool Rescue at this point for helping me out with the dimensions on these two parts by disassembling and measuring his own hammer drill. After a bit of search on eBay I found a set of original Rawlplug drill bits. After they arrived I was able to measure the shaft and the taper of the drill to then turn a new tool holder. It all worked out very well and yes, the drill only holds with the taper ;-)
    Before I even started this project I just had one question in mind „How am I going to replace the messed up handle cover?“. My first idea was to wrap it in nice black leather like steering wheels are made. That would definitely work, but that's something I've never done before so I was quite sceptical. Then the idea of a heat shrink tube came up. That would be a very easy solution, but heat shrink tubes don't have any structuires to it and it wouldn't quite fit the the rest of the tool. Thanks to the research of my Patreons and channel members, they have found very special heat shrink tubes that have a structure in it. I really liked it as it almost looked exactly the same like the original handle.
    After all it was a very intense and time consuming project. I've done so many hours of research on this one and I had to learn new skills. I'm very happy how it turned out.
    I hope you like my work and the video.
    Huge thank you to all of my Patreon supporters and specially to:

    Tonya M Broerman
    Zack Thompson
    Adel AlSaffar
    afreeflyingsoul
    Yale Baker
    Gregory
    Alex McGeorge
    Alistair Moor
    Amar.k
    Bendurion
    Courtney Maleport
    David Barker
    Greg Marston
    Joshua Bentley
    Lambda GPU Workstations
    Luke Schmick
    Luke Stone
    Matt Bosch
    Mellissa Marcus
    Mike Schlodder
    Monte Gibbs
    Muzaffer Aksoy
    Nick Houston
    Paul Mampilly
    potokslow
    Todd Medbury
    Vickie Bligh
    Vince Valenti
    Xavier Carbel
    Yuri Zapuchlak
    Aaron Quante
    Alex Breton
    alex latzko
    Allen Frank
    Amanda Taylor, Esq
    Andreas Mimra
    Andrew Phillips
    Anthony Adams
    Arni Bjorgvinsson
    audi4444player
    Blake T
    Brandon Fitzwater
    Brian Newton
    Carlo
    Chad Bryant
    Chris Simondet
    Grok Senften
    Haley McFadden
    Harper Kim
    Hunter R.
    Jason Koi
    Jason Tarlov
    Jeremy Cole
    Jonas Richartz
    Jordan Page
    justin f.
    Kelly Imgrund
    Kurt Gazow
    Marc Cerisier
    Marius Costan
    Martin Rønnow Klarlund
    Mellissa McConnell
    Michael Bier
    Mickey Eisenhorn
    Mike Donaldson
    Nick Cannon
    Pasacal Schmikal
    Philipp
    Schultes Thomas
    Scott Marshall
    Sergei Shvartsman
    Svenja Kuckla
    The Carlsons
    Trevor Kam
    Tucker Ifft
    Warren G Strand Jr
    William Wallace
    웅록 윤

    My camera:
    Panasonic HC-VX11

    If you have any questions about the process, machines i'm using or other stuff, just ask me in the comments. I read them all and i try to reply as soon as possible.
    Sorry for my bad english, it's not my language. I try my best to improve my technical english.
    Subscribe for more of my content. I'm uploading videos about mechanical stuff, as new creations and buildings and also restorations.
    Thank you for watching :-)

    Building a Huge Rotary Tumbler from Scratch - Homemade Rotary Tumbler
    svheat.info/the/video/mGiY3mePp57MhJk
    „I make a new one“ T-Shirts:
    teespring.com/stores/my-mechanics
    My Main Channel:
    svheat.info
    My Second Channel:
    svheat.info/start/4EQCwfH54ieNPswtXh5K0w
    My Patreon Page:
    www.patreon.com/mymechanics
    Follow me on Instagram:
    my_mechanics
    My Facebook Page:
    My-mechanics-1966277857002099/

kid aubie
kid aubie

i thot we did not speak about the drill

Pred hodinou
Keep
Keep

you didnt restaurate it.... you made it better then new. thumbs down. kidding.

Pred 5 hodinami
Evo Macias
Evo Macias

When your in a zombie apocalypse:

Pred 6 hodinami
Даврон Касымов
Даврон Касымов

И что это было ? Дрель?

Pred 8 hodinami
Recovery
Recovery

MUITO BOM

Pred 13 hodinami
EvilKris
EvilKris

this is the guy you wanna be married to when the zombies come

Pred 14 hodinami
Al Depantchu
Al Depantchu

Your measurements are flawless. We are talking micrometers sometimes.

Pred 15 hodinami
adnilson correa
adnilson correa

How long did it take?

Pred 17 hodinami
B
B

Okay time to get off youtube, the "bluing liquid" broke my brain...

Pred 18 hodinami
Y Qisq
Y Qisq

wow that's how it works.

Pred 22 hodinami
Manah Rasa
Manah Rasa

Bdjjsbs

Pred dňom
Manah Rasa
Manah Rasa

Bshdid

Pred dňom
cem coskun
cem coskun

the mechanics asmr

Pred dňom
Мастер Сваргань-ка
Мастер Сваргань-ка

Friends, support the masters from Russia. Beginner channel, I will be grateful

Pred dňom
Jur4S
Jur4S

You rly hate hard eadges :D

Pred dňom
Jamalludin Jamall
Jamalludin Jamall

Nice workmanship...someday i hope i have the machine to make restoration..

Pred dňom
punjab Issues
punjab Issues

Peace at 25:23☺️

Pred dňom
Sergey
Sergey

Испытывайте устройство после реставрации👍

Pred dňom
INFO LIKE US
INFO LIKE US

This is not restoration this is destruction 👎

Pred dňom
Птичка Таро
Птичка Таро

Кто знает,что за краска? Он покрывает метал.

Pred dňom
Francisco L. Buenfil
Francisco L. Buenfil

i hate the bluing

Pred dňom
Songs in 8d
Songs in 8d

IT looks like mp40

Pred dňom
Charles Jordan
Charles Jordan

Your machining skills are second to none sir.

Pred dňom
Vanish Chandan
Vanish Chandan

Dont watch these videos... They are addictive😂😂😍

Pred dňom
Branman Hosmaniac
Branman Hosmaniac

What fuel is used in your torch!!

Pred dňom
Takeo S
Takeo S

8:49 this part impressed me a lot. made 2 pieces to 1 seamlessly

Pred dňom
Thamizhiniyan S
Thamizhiniyan S

You are so precise and gentle... No material is harmed in the making of this video...

Pred dňom
Silvio Romero
Silvio Romero

O mi god😱

Pred dňom
Mr Trickyfingers
Mr Trickyfingers

Bro the metal turning black is like magic

Pred dňom
A_B_N_SYRIA
A_B_N_SYRIA

Well done

Pred dňom
A_B_N_SYRIA
A_B_N_SYRIA

Wow

Pred dňom
Kevin ff
Kevin ff

Aca esta el comentario en español que buscabas 😼🤠

Pred dňom
Sam Armstrong
Sam Armstrong

I really wish my dad were alive so he could watch your videos( he was an engineer too)👍

Pred dňom
RT1_ Firegod
RT1_ Firegod

Schweiz???

Pred dňom
seikhuneo kips
seikhuneo kips

Here we see human is nothing without machine if brain is not exist in human body then just think

Pred dňom
Andres Felipe Montenegro Quintero
Andres Felipe Montenegro Quintero

best 26 mins of my life

Pred dňom
CASTLE EXPLORER ALADIN KI KAHANI
CASTLE EXPLORER ALADIN KI KAHANI

Who thought this mp 40 of free fire and come in this video 👇

Pred dňom
корней чуковский
корней чуковский

срочно нужно 1000 подписчиков!!!!помогите плИИИИИИЗззззз!!))

Pred dňom
Mr. Coca. Cola !
Mr. Coca. Cola !

Что за черная краска ? Необычная

Pred 2 dňami
Y.E.S.
Y.E.S.

nvm you did

Pred 2 dňami
Husky
Husky

Alternative title: Batman's First Grapplin Hook - Restoration

Pred 2 dňami
Leo Park
Leo Park

WHAT...this dude can literally make anything with his ability. Very masterful craftmanship.

Pred 2 dňami
Alexandre Rodrigues
Alexandre Rodrigues

E agora como é que vai atira com essa bugiganga aí pow😕😕😕

Pred 2 dňami
Adrienn Gugi
Adrienn Gugi

Cool

Pred 2 dňami
Nurbek
Nurbek

Отличная работа!👍👍👍👍👍

Pred 2 dňami
Orion Pullen
Orion Pullen

extremely well done. pretty confident the shoulder plate should be turned 90 degrees. I don't think it would be comfortable to use as shown. But, thas small potatoes. Superb!

Pred 2 dňami
erken konuşma
erken konuşma

YIL 2021 OHAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA

Pred 2 dňami
Lakhan singh Rajput
Lakhan singh Rajput

Mp 40 😁

Pred 2 dňami
Leon Kriner
Leon Kriner

Amazing!

Pred 2 dňami
Steezy_cain
Steezy_cain

Imagine knowing u had a dead mans old skin particles on ur hands

Pred 2 dňami
Aditya Sagar
Aditya Sagar

WOW Victor SMG GUN😍😍😍😍

Pred 2 dňami
alexandre magno Magno
alexandre magno Magno

Qual é o nome desta ferramenta?... Brasil.Rj.

Pred 2 dňami
Yasmin Fernandes
Yasmin Fernandes

O

Pred 2 dňami
اسماعیل شاهوزی
اسماعیل شاهوزی

عالی بود

Pred 2 dňami
SCG
SCG

WOW! Looks awesome!

Pred 2 dňami
Paulina Xavier
Paulina Xavier

Parabéns pelo trabalho ! Magnífico.

Pred 2 dňami
lashawnda hibbard
lashawnda hibbard

For someone who has no idea about metals and parts and all of that what does the bluing do is it like a protective coat Maybe a rust preventer both I'm not sure I just kind of wanted little you know it's like a rust preventer or you know a little help please other than that great video

Pred 2 dňami
Grace Masih
Grace Masih

Bander

Pred 2 dňami
sparki
sparki

dopiero po 26 minutach dowiedziałem się że to nie służy do łowienia ryb

Pred 3 dňami
Mr.Krestik
Mr.Krestik

кто русский ?

Pred 3 dňami
- Ооо-ооО
- Ооо-ооО

🤣👍

Pred 3 dňami
Артур Хурумов
Артур Хурумов

привет

Pred 3 dňami
Karl Marx
Karl Marx

:)

Pred 3 dňami
أبو زيد النحوي
أبو زيد النحوي

مافي عربي هنا 😊😊🙂🙂

Pred 3 dňami
Konrád Kopečný
Konrád Kopečný

Hi, Nice piece of work. What is the " very special heat shrink tubes" please. This info would be very useful for some other of us.

Pred 3 dňami
Martin Kaufmann
Martin Kaufmann

Saw that kind of tool the first time... cool thing... superb restourartion and good insights how it mechanicaly workes... thx

Pred 3 dňami
Lexx Str
Lexx Str

Полчаса эстетического удовольствия! С какой любовью всё сделано! Просто нет слов.

Pred 3 dňami
April Maulana
April Maulana

Asmr

Pred 3 dňami
Poher
Poher

завораживает

Pred 3 dňami
bilal kaya
bilal kaya

Yarım saattir silah yapacak saniyom bende meğer matkap yapıyormuş 😃

Pred 3 dňami
Alex Popa
Alex Popa

this channel should be named "I make new one" :)))

Pred 3 dňami
josh johnson
josh johnson

should have kept the dent imo, its part of that specific tools history and personality. If your gonna fix every little bit of it why not just make a new one from scratch?

Pred 3 dňami
zeeno
zeeno

just douse it in oil

Pred 3 dňami
WholeLottaMiata 69
WholeLottaMiata 69

I love my sandblaster, it’s so satisfying to use

Pred 3 dňami
Aurelien Benoit
Aurelien Benoit

Looks like a bioshock 3 weapon

Pred 3 dňami
Mohammad Mursalin
Mohammad Mursalin

You practically made the entire thing except for the main casing. But that drill looks absolutely beautiful.

Pred 3 dňami
Claudio Gioacchino Maria Marsico
Claudio Gioacchino Maria Marsico

WELL DONE!

Pred 3 dňami
قاسم عبد الرحيم
قاسم عبد الرحيم

اكو عرب باّلطياَرة

Pred 3 dňami
IMMORTAL SOHAM
IMMORTAL SOHAM

Idk but it looks like mini 14 from pubg lmao

Pred 3 dňami
Phb Phb
Phb Phb

No😡😡😡😡😡😡😡😡👿👿🤮🤮🤮😓😓GUN!

Pred 4 dňami
nmgb zda
nmgb zda

أخمص الكتف بالعكس ارجو تصحيح التصليح

Pred 4 dňami
Tidal Epc
Tidal Epc

im kinda sad he didn't use the OG drill bit

Pred 4 dňami
Azibrani Thoriq
Azibrani Thoriq

i like it

Pred 4 dňami
Carsten Siu
Carsten Siu

Is it just me or low key it looks like a Sturmpistole

Pred 4 dňami
Sreekumar M R
Sreekumar M R

Excellent 💕

Pred 4 dňami
boryavasili
boryavasili

Man, my absolute favorite part is when the rivet on the shoulder plate is ground down so seamlessly.

Pred 4 dňami
lachlan pike
lachlan pike

What was your nightmare restoration

Pred 4 dňami
Lynch Creek Muzzy
Lynch Creek Muzzy

ASMR for mechanics

Pred 4 dňami
Булька и Шарик
Булька и Шарик

I'm not even mechanically inclined, but your videos are addictively beautiful.

Pred 4 dňami
Michael Howe
Michael Howe

This guy is the king of fix old things that would normally be thrown away

Pred 4 dňami
Lol Rekt
Lol Rekt

25:18 I - inspect weapon

Pred 4 dňami
powderedwater67
powderedwater67

that is freaking beautiful. Any way to make it hold modern day drill bits?

Pred 4 dňami
Christi Delaport
Christi Delaport

Does bluing have any physical purpose or is it solely for aesthetics?

Pred 4 dňami
Станислав Матвеев
Станислав Матвеев

Вы девушка, признайтесь, пальцы аккуратные, не верю)

Pred 4 dňami
Рая Какимжанова
Рая Какимжанова

Вери гууд😄👍

Pred 4 dňami
GGG KKK
GGG KKK

это ручная дрель

Pred 4 dňami
Ольга Шуматова
Ольга Шуматова

А что это вы оживляли

Pred 4 dňami
Florin Frangulea
Florin Frangulea

good work like

Pred 5 dňami
Bean
Bean

I wonder what would happen if we showed this to the original creator

Pred 5 dňami
DRKDark-_-
DRKDark-_-

To be honest whenever I first saw the thumbnail and didn’t read the title I thought it was a harpoon gun

Pred 5 dňami

Ďalej

Old Soviet motorcycle full Restoration

34:59

Old Soviet motorcycle full Restoration

Great idea

Zhliadnutia 36 mil.

Antique Soldering Iron (Blowtorch) - Hot Restoration

22:52

Sebastián Yatra, Myke Towers - Pareja del Año (Official Video)

3:28

Antique Hand Cranked Grinder - Restoration

23:47

Antique Hand Cranked Grinder - Restoration

my mechanics

Zhliadnutia 12 mil.

M4 Sherman Restoration Abandoned US Tank

12:33

M4 Sherman Restoration Abandoned US Tank

Restore Machines

Zhliadnutia 6 mil.

Antique Kitchen Scale Restoration - The Masterpiece

26:24

Dovetail Tomahawk

15:26

Dovetail Tomahawk

Black Beard Projects

Zhliadnutia 17 mil.

1972 Opel GT, Will It Run After 30 Years? | Turnin Rust

1:02:43

1972 Opel GT, Will It Run After 30 Years? | Turnin Rust

Turnin Rust Network

Zhliadnutia 25 mil.

Forging a KATANA out of Rusted Iron CHAIN

14:52

Forging a KATANA out of Rusted Iron CHAIN

Random Hands

Zhliadnutia 132 mil.

Antique Rusty Cleaver - Restoration

13:26

Antique Rusty Cleaver - Restoration

my mechanics

Zhliadnutia 4,8 mil.

FULL BUILD: Restoring a '70 Chevy Camaro RS/SS

1:42:47

Sebastián Yatra, Myke Towers - Pareja del Año (Official Video)

3:28

DIRECTO | FUNERAL de FELIPE de EDIMBURGO

3:51:43

DIRECTO | FUNERAL de FELIPE de EDIMBURGO

El País

Zhliadnutia 319 tis.

BTS (방탄소년단) 'Film out' Official MV

3:49

BTS (방탄소년단) 'Film out' Official MV

HYBE LABELS

Zhliadnutia 86 mil.

Burritos de Pork Belly | La Capital

8:58

Burritos de Pork Belly | La Capital

La Capital

Zhliadnutia 2,3 mil.

Rels B - CLASE G (Video Oficial)

2:05

Rels B - CLASE G (Video Oficial)

Rels B / Skinny Flakk

Zhliadnutia 1,4 mil.